+38 (067) 445-60-35
info@kdtmac.com.ua
Double-sided edge banding machines
Double Sided Edge Banding Machine KE-2468JHSKCAD
- Automatic stops in conveyor pads for positioning parts at 90°
- Pre-milling unit with double chopper
- Upper glue bath
- 4-motor corner rounding
- Feeding speed - 20-26 m/min
- Machine units: 1. Pre-milling unit. 2. Gluing unit. 3. End cutting unit. 4. 1-st fine trimming unit. 5. 2-nd fine trimming unit. 6. Corner rounding unit. 7. Radius scrapping unit. 8. Glue scrapper. 9. Grooving unit on both sides. 10. Buffing unit
Watch video
Double Sided Edge Banding Machine KE-2368JHSKCAD
- Automatic stops in conveyor pads for positioning parts at 90°
- Pre-milling unit with double chopper
- Upper glue bath
- Feeding speed - 20-26 m/min
- Machine units: 1. Pre-milling unit. 2. Gluing unit. 3. End cutting unit. 4. 1-st fine trimming unit. 5. 2-nd fine trimming unit. 6. Radius scrapping unit. 7. Glue scrapper. 8. Grooving unit on both sides. 9. Buffing unit
Four-sided edgebanding line based on KE-2468JHSKCAD machines
- Edge banding of the workpiece from all sides in one pass
- Pre-milling unit with double chopper
- Upper glue bath
- 4-motor corner rounding
- Feeding speed - 20-26 m/min
- Machine units: 1. Pre-milling unit. 2. Gluing unit. 3. End cutting unit. 4. 1-st fine trimming unit. 5. 2-nd fine trimming unit. 6. Corner rounding unit. 7. Radius scrapping unit. 8. Glue scrapper. 9. Grooving unit on both sides. 10. Buffing unit
Double Sided Edge Banding Machine KE-2468JHSK
- Upper glue pot
- Grooving unit
- Spray/clean units - 2 pcs
- Min workpiece size: 285x285mm
- Feeding speed: 12-20 m/min
- Machine units: 1. Pre-milling unit. 2. Gluing unit. 3. End cutting unit. 4. 1-st fine trimming unit. 5. 2-nd fine trimming unit. 6. Corner rounding unit. 7. Radius scrapping unit. 8. Glue scrapper. 9. Grooving unit on both sides. 10. Buffing unit
KDT Machinery's double-sided edgebanders are two edgebanders mounted on sliding rails with synchronization devices between them.
Double-sided edgebanding machines for gluing PVC edges are used in large furniture industries and significantly save time and resources of the enterprise, due to gluing two sides of the workpiece in one pass.
The machines operate at a gluing speed of up to 26 m/min and are equipped with different units, like conventional continuous edge banding machines, depending on the wishes of the client.
A very important advantage of KDT Machinery double-sided edge banding machines is a large range of consumables and spare parts in stock, as well as highly qualified service support and a full 12-month warranty!
Facebook
Instagram
YouTube© 2025 KDT Woodworking Machines