Purpose

Universal edge banding machine KDT-305M with a quick change system for PUR/EVA glue baths is designed for gluing straight and curved edges of furniture boards and blanks with natural strip and synthetic roll material.

The glue pot is interchangeable with the top pans of KDT edgebanders and is also compatible with the glue pot cleaning and storage system.

Distinctive features

• Removable top glue bath for working with PUR/EVA glue .
• Two modes of operation, processing straight/curved parts with automatic edge cutting and from the pedal.
• The glue unit with the bottom location of the glue bath eliminates the appearance of excess glue on the desktop.
• Large table, height adjustable.
• The edging material is fed into the gluing area automatically from the magazine.
• The feed rate is controlled by the inverter.
• An air preparation unit with a moisture separator and an oiler for automatic lubrication of the entire pneumatic system of the machine.

Design advantages

The interchangeable top glue bath allows you to work with PUR/EVA glue and change the color of the glue. The bath is interchangeable with the top baths of KDT edgebanders .

The control panel of the machine is convenient and intuitive, all machine controls are concentrated in one place.

The larger worktable allows for easy edging of larger workpieces.

The infeed table is height-adjustable, allowing it to be adjusted to the edge overhangs.

Edge material supply store.

The powerful and reliable design of the drive of the glue applicator and feed roller guarantees the stable operation of the machine for a long service life.

A contact drive roller with adjustable edge position in height allows you to get a high-quality connection between the edge and the workpiece.

A powerful guillotine allows you to successfully cut the edge to the maximum width.

Pedal for trimming the edge in manual mode.

An air preparation unit with a moisture separator and an oiler for automatic lubrication of the entire pneumatic system of the machine.

Electrical components are made according to CE standards using the best components.